Finally, there is a simple and inexpensive way to secure and remove the flight battery for your Synergy E6 and E7. That flight battery can be a very tight fit and difficult to wrestle in and out of the frames once you put Velcro™ strips on the bottom plate and the battery - which are needed to hold it in place. Extracting the battery can be especially difficult to do without potentaily damaging the battery.
This battery tray for the E6 and E7 solves that problem. A pair of 6S, or a single 12S battery is attached to the tray using the usual Velcro™ strips, then the entire assembly slides into the frames and snaps into place. The standard Velcro™ straps that are included with the helicopter can then be used to secure everything. The combination of a positive lock into the bottom plate and the straps securely hold the battery, yet it is easy to remove after a flight.
- Lightweight - less than 45 grams
- Works with a pair of 6S packs, or a single 12S
- Simple installation - snaps securely into position
- Notches along the edges allow for additional Velcro™ straps to be used if desired
- Uses existing mounting locations on helicopter frames - no modifications to the helicopter are needed
- No extra hardware or moving parts
- Available in multiple colors